|
Ringfit uPVC pipe with rubber ring joint are specially designed for higher diameter pipes and no solvent cement is required which leads to easy installation & leak proof joint.
Range: Ringfit pipes are manufactured in the range of 63mm to 400mm diameter in 4,6,8 and 10kgf / cm2 working pressure classes.
Advantages: • The rubber jointed pipes are very easy and convenient for installation. • The Rubber ring helps absorbing the lines expansion and contraction leaving the seal intact in case of extreme tempreature variation. • Certain deflection upto say 2% of each joint due to shifting of soil, land contour etc.can be easily absorbed by the rubber ring joint.
Technical Specification: |
 |
| Nominal Outside Diameter. (m) | Mean Outside Diameter | Wall Thickness (mm) | ||||||||
| Class1 0.4 MPa |
Class3 0.6 MPa |
Class4 0.8 MPa |
Class5 1.0 MPa |
|||||||
| Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | |
| 63 | 63.0 | 63.3 | 1.5 | 1.9 | 2.2 | 2.7 | 2.8 | 3.5 | 3.5 | 4.1 |
| 90 | 90.0 | 90.3 | 2.1 | 2.6 | 3.1 | 3.7 | 4.0 | 4.6 | 5.0 | 5.7 |
| 110 | 110.0 | 110.4 | 2.5 | 3.0 | 3.7 | 4.3 | 4.9 | 5.6 | 6.1 | 7.1 |
| 125 | 125.0 | 125.4 | 2.9 | 3.4 | 4.3 | 5.0 | 5.6 | 6.4 | 6.9 | 8.0 |
| 140 | 140.0 | 140.5 | 3.2 | 3.8 | 4.8 | 5.5 | 6.3 | 7.3 | 7.7 | 8.9 |
| 160 | 160.0 | 160.5 | 3.7 | 4.3 | 5.4 | 6.2 | 7.2 | 8.3 | 8.8 | 10.2 |
| 180 | 180.0 | 180.6 | 4.2 | 4.9 | 6.1 | 7.1 | 8.0 | 9.2 | 9.9 | 11.4 |
| 200 | 200.0 | 200.6 | 4.6 | 5.3 | 6.8 | 7.9 | 8.9 | 10.3 | 11.0 | 12.7 |
| 225 | 225.0 | 225.7 | 5.2 | 6.0 | 7.6 | 8.8 | 10.0 | 11.5 | 12.4 | 14.3 |
| 250 | 250.0 | 250.8 | 5.7 | 6.5 | 8.5 | 9.8 | 11.2 | 12.9 | 13.8 | 15.9 |
| 280 | 280.0 | 280.9 | 6.4 | 7.4 | 9.5 | 11.0 | 12.5 | 14.4 | 15.4 | 17.8 |
| 315 | 315.0 | 316.0 | 7.2 | 8.3 | 10.7 | 12.4 | 14.0 | 16.1 | 17.3 | 19.9 |
| 355 | 355.0 | 356.1 | 8.1 | 9.4 | 12.0 | 13.8 | 15.8 | 18.2 | 19.6 | 22.6 |
| 400 | 400.0 | 401.2 | 9.1 | 10.5 | 13.5 | 15.6 | 17.8 | 20.5 | 22.0 | 25.3 |
Note1- The table is based on metric series of pipe dimension given in ISO 161/1 in respect of pipe dimensions and ISO DIS 4422.
Note2- The wall thickness of Pipe is based on safe working stress of 8.6 Mpa at 27°C.The working pressure gets reduced at sustained higher tempreatures.Occasional Rise in tempreature ,as in summer, with concurrent corresponding reduction in tempreature during rights has no deterious effect on the working pressure of pipes considering the total life of pipe.
Featured Links
Featured Products
Featured Products
Contact Us
81, F.I.E. Patparganj
Delhi - 110092
Phone : + 91-11- 43041400
Fax : +91-11-22145978
Email:info@advance.co.in
